Celadon Infrared Remote Control Systems
Infrared Remote Controls Infrared Receivers Information Request Form Celadon Company Profile Contact Celadon Sales

Custom Infrared to RS232 Code Device List
For use with RCV-5000 Infrared to RS-232 Output Receiver


Below is a list of electronic device manufacturers and devices for which custom RS232 firmware has been developed for the Celadon RCV-5000 Infrared Receiver. All listed devices have an RS-232 port, which the manufacturer has configured to accept RS232 commands for control of the device (discrete commands for instance). Celadon uses the technical reference manuals for these devices to configure the RCV-5000 IR to RS-232 converter.

PROGRAMMING THE RCV-5000 WITH DEVICE RS232 FIRMWARE FILES


These RS232 Firmware files are loaded into the RCV-5000 IR to RS232 Receiver using the RCV-5000 Programming Software. The RCV-5000 Program can be downloaded by selecting the following link:

RCV-5000 PROGRAMMER - 18MB File size. Zipped. MS WIN Version.

After installing the RCV-5000 Program, download the firmware files you will need from the list below. Each file is compressed using the ZIP format. The actual file is a .hex file and should be copied to the "HEX FILES" folder in the RCV-5000 Program Folder (this should be located in your "Program Files" folder on you local hard drive unless another location was chosen during the setup installation of the program). The HEX RS232 files will then be available within the program for download.

IMPORTANT - The RCV-5000 is loaded with a special ROM "BOOT" code which runs the RCV-5000. As we make changes, this boot code is updated. At the end of the list below is a link to download the latest RCV-5000 ROM Boot code. This file should be loaded first into the RCV-5000 before loading any of the HEX files. Your RCV-5000 will come with the latest Boot ROM, but as new firmware files are added, new features may be changed such that the HEX file may only run with the latest BOOT code. The latest BOOT code will always work with prior HEX RS232 Firmware files. Please see the RCV-5000 Program Instructions for procedures for loading the ROM Boot code as well as RS232 HEX Firmware Files.

RCV-5000 CONTROL WITH INFRARED (IR) CODE FILES

The RCV-5000 is controlled using custom infrared code sets Celadon has developed for the Philips/Marantz Pronto (.ccf and .pcf file formats). The tables accessible below provide the IR code mapping for the functions available for each device listed. For example, Pronto Button 1 may control ON and Pronto Button 2 may control OFF. All tables listed below show the exact button to use for each function of the device. Using software such as Pronto Edit (from the Pronto site) you can re-name the buttons and move them around to fit any desired format.

Note: Not all commands available through the RS232 port have been programmed for each device. Should you require further functions you know are available through the RS-232 port, please contact us.

See a list of the Infrared (IR) Code Files for the Pronto Remotes (.ccf and .pcf)

CELADON STANDARD RS232 FIRMWARE

Celadon has created a Generic RS232 Output Firmware file to use for applications where a specific RS232 code is not needed. The RCVSTD.HEX firmware file (at the end of the table below) will transmit Generic code fiiles based on the actual infrared code is sees from a remote control.

For Example, if you use a remote control that uses the NEC Infrared Protocol Format, the RCV-5000 will send out an ASCII string "NXXYYZZ" where "N" indicates NEC Format, XXYY will be the Device Identifier for that particular NEC code (such as 6E91), and then "ZZ" will be the button number assigned to that particular code. A sample RS232 ASCII string would look like:

N6E9100

Where N indicates NEC, 6E91 is the device identifier (typically the same for all keys on a single remote control), and 00 is the button number that was pressed. Buttons might be sequential; 00, 01, 02, or could be in some other order.

The RCVSTD.HEX Standard Firmware is useful if you wish to connect the RCV-5000 to a computer and use an off the shelf remote control to control the computer. A software program will need to be written to take the incoming RS232 ASCII codes and then perform a function. Communication protocols with the computer is set up as 9600 Baud, 8N1 for the RCVSTD.HEX firmware.


CELADON RCV-5000 RS232 CODE DEVICE TABLE

Manufacturer Device Model
Remote Control Used
RS232 Codes Output Table Link (WEB HTML LINK)
RS232 Codes Output Table Link (PDF) RCV-5000 RS232
Firmware (HEX)
(Files are zipped - 4K)
APC UPS-Link Power Supply APC UPS-Link Pronto (CCF File) APC UPS-Link (CCF Version) APC UPS-Link (CCF Version) APC1_r.hex
APC UPS-Link Power Supply APC UPS-Link SC-33A or SC-33B APC UPS-Link (SC-33 Version) APC UPS-Link (SC-33 Version) APC2_r.hex
Autopatch Matrix Switcher PrecisLT AVS-PL-0808-345 8x8 Pronto (CCF File) Autopatch AVS-PL-0808-345 Autopatch AVS-PL-0808-345 autopatch1_r.hex
BENQ Projector PB7000 Pronto (CCF File)
BENQ PB7000
BENQ PB7000
benq2_1r.hex
Canon Projector LV-7345 and LV-7355 Pronto (CCF File)
Canon LV7345
Canon LV7345
canon1_r.hex
Celadon IR Receiver - RS-232 output RCV-5000 Celadon BW7070 RCV-5000 w/BW7070 RCV-5000 w/BW7070 bw7070.hex
Celadon IR Receiver - RS-232 output RCV-5000 Celadon SC-33A or SC-33B RCV-5000 w/SC-33A RCV-5000 w/SC-33A sc33a.hex
Celadon IR Receiver - RS-232 output RCV-5000 Celadon SC-45 RCV-5000 w/SC-45 RCV-5000 w/SC-45 sc45_1.hex
Dell Projector 4100MP Pronto (CCF File) Dell 4100MP Dell 4100MP dell2_r.hex
Extron Switcher SW6 SV A MX Pronto (CCF File)
Extron SW6 SV A MX
Extron SW6 SV A MX
extron1_r.hex
Extron Switcher 88HV Pronto (CCF File)
Extron 88HV
Extron 88HV
extron4_r.hex
Extron Switcher MAV Pls 816 AV Series Pronto (CCF File)
Extron MAV Pls 816 AV
Extron MAV Pls 816 AV
extron8-16_r.hex
Faroudja DVI NRS Pronto (CCF File)
Faroudja NRS DVI
Faroudja NRS DVI
farou2_r.hex
Feral Key West Quad Switcher QS440-1 Pronto (CCF File)
Feral Key West QS440-1
Feral Key West QS440-1
feral1_r.hex
Fujitsu Plasma P50XCA Pronto (CCF File)
Fujitsu P50XCA
Fujitsu P50XCA
fujitsu5_r.hex
Fujitsu Plasma 4222 and PDS4211E-H, PDS4211W-H,
PDS4212E-H, PDS4212W-H, PDS4221, PDS4222
Pronto (CCF File)
Fujitsu 4222
Fujitsu 4222
fujitsu2a.hex
GE Triplex DVMR Digital Video Multiplexer Recorder Calibur Pronto (CCF File)
GE Calibur
GE Calibur
calibur2_r.hex
GE Triplex DVMR Digital Video Multiplexer Recorder Calibur Celadon SC-45
GE Calibur
GE Calibur
calibur2_SC45_r.hex
Infocus Projector LS110 Pronto (CCF File) Infocus LS110 Infocus LS110 infocus1_r.hex
Infocus Projector SP7200 Pronto (CCF File)
Infocus SP7200
Infocus SP7200
infocus2_r.hex
Infocus Projector LP-820 Pronto (CCF File) Infocus LP-820 Infocus LP-820 infocus3_r.hex
iVision Projector SX Pronto (CCF File)
iVision SX
iVision SX
iVision.hex
Key Digital Switcher KD-MSW8x3 Pronto (CCF File)
Key Digital KD-MSW8x3
Key Digital KD-MSW8x3
keydig1_r.hex
Key Digital Switcher KD-MSW8x4 Pronto (CCF File)
Key Digital KD-MSW8x4
Key Digital KD-MSW8x4
keydig2_r.hex
KOTI Video Multiplexer 816NR Pronto (CCF File)
KOTI 816NR
KOTI 816NR
koti2_r.hex
KOTI Video Multiplexer 816NR Celadon SC-45
KOTI 816NR
KOTI 816NR
koti3_r.hex
Lumagen HDP Scaler Vision HDP SC-33A or SC-33B (all codes repeat)
Lumagen Vision HDP
Lumagen Vision HDP
lumagen2_r.hex
Lumagen HDP Scaler Vision HDP SC-33A or SC-33B (one-shot mode)
Lumagen Vision HDP
Lumagen Vision HDP
lumagen2b_r.hex
Marantz Plasma PD5010D Pronto (CCF File)
Marantz PD5010D
Marantz PD5010D
marantz1.hex
NEC Plasma 42XM2 - 42VP4 - 42VP4D  Pronto (CCF File)
NEC 42 Plasma
NEC 42 Plasma
nectv5_r.hex
NEC 4x Plasma 84VP4 Pronto (CCF File)
NEC 84VP4
NEC 84VP4
nect841_r.hex
NEC Plasma 40 inch, 60 inch Pronto (CCF File)
NEC Plasma 40 - 60
NEC Plasma 40 - 60
nectv4_r.hex
Optoma DLP Projector HD81 Pronto (CCF File)
Optoma HD81
Optoma HD81
optoma1_r.hex
Panasonic Plasma most models Pronto (CCF File)
Panasonic Plasma
Panasonic Plasma
panaso1_r.hex
Panasonic Plasma TH-42PHD6UY Pronto (CCF File)
Panasonic TH-42PHD6UY
Panasonic TH-42PHD6UY
panaso2_r.hex
Quadscan Scaler Elite Pronto (CCF File)
Quadscan Elite
Quadscan Elite
quadsn1_r.hex
Runco Projector PL-50C3611 Pronto (CCF File)
Runco PL-50C3611
Runco PL-50C3611
runco3_r.hex
Runco Projector VX-1000ci Pronto (CCF File)
Runco VX-1000ci
Runco VX-1000ci
runco1_r.hex
Runco Projector VX101c Pronto (CCF File)
Runco VX101c
Runco VX101c
runco2_r.hex
Samsung LCD Monitor Syncmaster 403T Pronto (CCF File)
Samsung 403T
Samsung 403T
samsng2_r.hex
Sanyo DVR DVR3009 Pronto (CCF File)
Sanyo DVR3009
Sanyo DVR3009
sanyo2_r.hex
Sanyo DVR DVR3016 Pronto (CCF File)
Sanyo DVR3016
Sanyo DVR3016
sanyo4_r.hex
Sharp LCD TV LC-37G4U Pronto (CCF File)
Sharp LC-37G4U
Sharp LC-37G4U
sharp2_r.hex
Sharp LCD TV LC-65D90U Pronto (CCF File)
Sharp LC-65D90U
Sharp LC-65D90U
sharp5_r.hex
Sharp LCD TV LC-45G1X and TU-45GAX Pronto (CCF File)
Sharp LC-45 TU-45
Sharp LC-45 TU-45
sharp3r.hex
Sharp Projector XV-Z2000 Pronto (CCF File)
Sharp XV-Z2000
Sharp XV-Z2000
sharp4_r.hex
Toshiba Hi Def DVD Player HD-XA1 Pronto (CCF File)
Toshiba HD-XA1
Toshiba HD-XA1
toshiba2_r.hex
Vidikron Projector Vision 3 Pronto (CCF File)
Vidikron Vision 3
Vidikron Vision 3
vidkv31_r.hex
Zenith Plasma Display Monitors Pronto (CCF File)
Zenith Plasma
Zenith Plasma
zenith1_r.hex

SPECIAL RCV-5000 CODE (Files are zipped)

       
Celadon RCV-5000 BOOT CODE RCVBOOT.ROM      
Celadon RCV-5000 Standard Celadon Firmware RCVSTD.HEX      
             
             

Celadon, Inc. | 58 Paul Drive, Suite D | San Rafael, CA 94903 U.S.A. | Sales: +1 (415) 472-1177 x201 | Fax: +1 (415) 472-1179
© Celadon, Inc. 2024 All Rights Reserved